Job Description:

1.Responsible for the design of pharmaceutical equipment products according to the project plan and customer requirements.
2. Produce 3D drawings according to the company's design specifications, and be able to independently complete 3D piping design.
3.Responsible for solving problems in the installation process, as well as the rectification of the customer's FAT addition.
4. Draw the design of various non-standard parts required in the equipment, including but not limited to tanks, electrical boxes, equipment pedestals, piping parts.
5. 3D modeling of equipment according to requirements.
6.Cooperate with engineering department to complete the positioning and installation of equipment and piping on site
7.Participate in the pre-project URS confirmation, PID design.
8.Responsible for assisting in the completion of project acceptance and SAT reports.
9.Design and optimize existing products and structures to improve performance and reduce cost

Tenure Requirements:

1. College degree or above, majoring in mechanical design, mechatronics related.  
2. Able to read and understand process schematics; ability to design mechanical non-standard components.
3. More than two years of relevant work experience, with experience in pressure vessel or bioreactor and dispensing fermentation system design, piping design.
4. Proficiency in applying 3D design software.

Job Description:

1. Responsible for the calculation and design of pressure vessels.

2. Responsible for producing 2D and 3D drawings according to company design specifications.

3. Responsible for the design and development of jigs, tools and special equipment required for production.            

4. Have the ability to design mechanical non-standard parts.

5. Responsible for developing product production process, preparing process documents, bill of materials (including but not limited to machining, cold work, sheet metal, welding, etc.), and monitoring the quality of production products.

6. Prepare BOM sheets based on production drawings.

7. Design and optimize existing products and structures to improve performance and reduce cost.

Tenure Requirements:

1. Specialized degree or above, majoring in mechanical design, mechatronics related majors; process equipment and control engineering is preferred

2. More than two years of relevant work experience, with experience in pressure vessel or bioreactor and liquid fermentation tank.

3. Proficiency in 2D and 3D mechanical design software.

4. Familiar with GB150 pressure vessel code standard.

5. Proficiency in SW6 and pressure calculation ability.

Job Description:

1、Responsible for the technical scheme design of pharmaceutical fermentation system, batching system, process materials, CIP station and other systems, provide necessary technical support, draw the process system flow chart, layout plan, axonometric drawing, etc..

2、Responsible for the preparation of technical and commercial bids for pre-sales communication tenders.

3、Responsible for the secondary design and procurement bill of materials in the project execution, including equipment selection and design calculation, and communication with procurement on material procurement matters.

4、Assist procurement and equipment and material manufacturers to confirm technical parameters.

5、Review the changes proposed on site and issue the corresponding change drawings.

6、Calibrate the design drawings responsible for other process designers.

7、Participate in and support the after-sales technical support services inside and outside the warranty period of other projects of the company.

Tenure Requirements:

1. College degree or above, majoring in pharmaceutical, biological, chemical engineering, environmental engineering or other related majors.

2.Experience or experience in pharmaceutical process and engineering piping design, and be able to complete the design work independently.

3. Proficient in the use of 2D design software, aspire to engineering design work, familiar with industry GMP design standards and specifications; proficient in office software.

4. Physically healthy, good interpersonal communication and coordination skills, honest and dedicated, with hard-working and teamwork spirit, love this job, have strong learning ability, proactive, strong sense of responsibility.

Job Description:

1、Responsible for providing technical support for the installation, commissioning and operation of the automatic control system for the project.

2、Responsible for or cooperate with the design of project-related self-control program, write self-control related procedures.

3、Responsible for the arrangement and archiving of complete technical documents for the self-control projects.

4、Responsible for attending and supporting after-sales technical support services.

5、Complete other tasks assigned by the company.

Tenure Requirements:

1.28-45 years old, bachelor degree or above, majoring in control engineering and automation machine is preferred.

2.Skilled in using step7, WinCC flexible 2008, WinCC, Configuration King, TIA Portal (Botu) and other programming software, with experience in software programming of biofermentation and liquid dispensing system is preferred.

3.Familiar with electrical schematic drawing (skilled in using EPLAN , Siemens 300/1200, Mitsubishi, Omron, ABB and other PLC, touch screen programming experience).

4.More than 5 years of practical experience in automatic control of pharmaceutical equipment is preferred, able to adapt to travel and withstand high work pressure, will debug pharmaceutical equipment can also be considered.

Job Description:

1、Responsible for providing technical support for the installation, commissioning and operation of the automatic control system for the project.

2、Responsible for the collation and archiving of complete technical documentation for self-control projects.

3、Responsible for attending and supporting after-sales technical support services.

4、To complete other tasks assigned by the company.

Tenure Requirements:

1.25-45 years old, with professional degree or above, majoring in electrical engineering and automation machine.

2.Skilled in using step7, WinCC flexible 2008, WinCC, TIA Portal (Botu) and other programming software, with experience in software programming of biofermentation and liquid dispensing system is preferred.

3.Familiar with the application of various instruments and their principles, with more than 1 year of field debugging experience

4. Familiar with electrical schematic drawing, (familiar with EPLAN)

5. Be able to adapt to travel and work under high pressure.

Job Description:

1、Responsible for proposing feasible validation schemes for system equipment such as pharmaceutical fermentation systems, batching systems, CIP stations, pure water, etc., and implementing them.

2、Prepare the validation documents and information required for system equipment.

3、Responsible for the site process and GEP implementation to ensure a high degree of standardization and standardization of the site installation.

4、Testing of projects in accordance with GEP documentation requirements to ensure that implementation meets URS requirements and validation requirements.

5、Responsible for FAT, IQ, OQ, SAT and GEP documents for each project.

6、Responsible for on-site FAT and SAT testing and completing the completion of each test record.

7、Responsible for the equipment in the verification process of the owner's questions in the answer, to maintain the company's image.

Tenure Requirements:

1. 25-40 years old, college degree or above, majoring in pharmaceutical, biological equipment or system engineering or other related fields.

2. experience in validation of bioreactive fermentation equipment (fermentation, liquid preparation and other system equipment) in pharmaceutical plants, able to implement the validation process hands-on, and able to independently inquire about the problems that lead to equipment failure.

3. familiar with the content requirements of GMP specifications.

4. familiar with the content requirements of pharmacopeial specifications.

5. Be able to adapt to short-term travel.

Job Description:

1. Responsible for the storage, warehousing and discharging of semi-finished products, finished products and spare parts.

2. To implement the company's warehouse management system and its rules and regulations to prevent errors in receiving and sending goods.  

3. Reasonably arrange the order of storage of semi-finished products and spare parts in the warehouse, and stack them in different areas according to the type, specification and grade, so as to keep the warehouse area neat and tidy.

4. Regularly take inventory of warehouse materials to ensure that the accounts, materials and cards are in line with each other, and assist the supervisor to do a good job of inventory, processing of inventory gain and loss and adjusting accounts.

5. Do a good job of product packaging, to ensure that the transport packaging requirements.

6. Maintain the environment of the warehouse area, and do a good job of warehouse 5S management.　

7. Batch according to the product BSM table, and notify the production of material after batching.

Tenure Requirements:

1, 28-35 years old, high school or above, more than 3 years of warehouse-related work experience in mechanical industry.

2, Proficient in office software, ERP system.

3, Have a strong sense of work responsibility, able to bear hardship and work hard, and obey the schedule.

Job Description:

1. Process inspection: timing inspection of machined parts, welded parts, stainless steel barrel and head during the production process, including size, appearance, opening position, weld seam, polishing roughness test, etc.

2. Incoming material inspection: inspect the materials purchased into the factory according to the drawing requirements, and ensure the completeness of the material list, do a good job of material tracing, and issue material storage notice.

3. Final inspection of the finished products according to the drawing requirements and issuing inspection reports.

4. To do PT on the completed tank honeycomb of welding and issue PT inspection report.

5. Conduct pressure test on finished fluid equipment.

Tenure Requirements:

1.25-35 years old, with high school education or above, more than 3 years of inspection related work experience in mechanical industry.

2.Ability to use various inspection tools and equipment.

3.Have the ability to read CAD mechanical drawings.

4.Able to bear hardship and work hard.

Job Description:

 Pressure vessel, stainless steel clean pipe welding.

Tenure Requirements:

 More than three years of experience in welding pressure vessels and stainless steel clean pipes, able to do "single-sided welding and double-sided forming". (Hold pressure vessel welding certificate is preferred)

Job Description:

 Assembling of pressure vessel tank products according to drawings.

Tenure Requirements:

1. The ability to read mechanical drawings.

2. Have experience in tank assembling and simple welding.

3. Able to bear hardship and work hard.

Job Description:

1, Operation of drilling machine, milling machine, will be round equal parts of punching holes, most of the stainless steel flange.

2, Equipment assembly work.

Tenure Requirements:

1. The ability to read CAD mechanical drawings.

2. Ability to operate milling machines, sawing machines and other machining equipment.

3. Able to bear hardships and work hard.

Job Description:

1. Production workshop safety education and training work.

2. Establish all safety inspection, safety management system, safety reward and punishment program, safety operation procedures in the workshop.

3. Workshop all production equipment safety operation and maintenance, develop and implement equipment maintenance plan, equipment point inspection plan and point inspection ledger, equipment maintenance and maintenance ledger, to ensure the safe operation of all production equipment.

4. responsible for safety accidents in the workshop, responsible for the investigation and analysis of safety accidents, the characterization of the accident, and give 5. accident investigation report, and make recommendations to the department responsible for the accident and those responsible for the treatment.

5. Receive the irregular inspection work from the Safety Supervision Bureau for production safety.

6. responsible for the inspection, maintenance, repair and annual inspection of the fire fighting facilities and elevators in the factory, and establish the facilities inspection ledger, point inspection records and annual inspection ledger.

Tenure Requirements:

1, 30-50 years old, college degree, more than 3 years of manufacturing work experience (machinery industry is preferred).

2, skilled in office software, ERP system.

3, have a strong sense of work responsibility, can bear hardship and work hard, and obey the schedule.

4. hold safety management related certificates.